{"id":212,"date":"2010-01-20T22:16:04","date_gmt":"2010-01-20T22:16:04","guid":{"rendered":"http:\/\/nobugs.org\/lejog\/?p=212"},"modified":"2010-01-20T22:45:47","modified_gmt":"2010-01-20T22:45:47","slug":"getting-the-gears","status":"publish","type":"post","link":"https:\/\/www.nobugs.org\/lejog\/?p=212","title":{"rendered":"Getting the gear(s)"},"content":{"rendered":"<p>I went to re-setup the gears on my bike (<a href=\"http:\/\/www.fisherbikes.com\/bike\/model\/hoo-koo-e-koo\">Gary Fisher Hoo Koo Ee Koo<\/a>) last week and couldn&#8217;t get them working.  Now, this is a bit frustrating because I&#8217;ve set up gears many times before and, although it can take a wee while to get them indexed right, the <a href=\"http:\/\/www.parktool.com\/repair\/readhowto.asp?id=64\">recipe<\/a> is simple and pretty foolproof.<\/p>\n<p>But for some reason, shifting wasn&#8217;t happened right.  After a while, I realised that it wasn&#8217;t really an indexing or limit-screw problem; the bike would eventually go into every gear.  Instead, it was as if the bike had developed memory.  If I&#8217;d previously been shifting up, then the first down-shift would be ignored!  Subsequent down-shifts would work fine. It was as if the bike could remember whether the previous shift has been up or down.<\/p>\n<p>My first suspicion was that the derailleur pivots were corroded or gunked up.  I was just about to go ahead and strip it down &#8211; but, upon releasing the gear cable from the derailleur I realised that the derailleur itself was moving completely smoothly.  Hmm, strange, can&#8217;t be that then.<\/p>\n<p>My next suspicion was that the ratchet mechanism in the shifter had gone funny.  But, by watching the cable move as it came out of the shifter, I could see that it was doing its job correctly &#8211; each click of the gear lever moved the cable out\/in by the same amount every time.<\/p>\n<p>Finally, I watched the gear cable along its length.  Near the handlebars, it moved in time with the shifters.  But at the other end, it wasn&#8217;t moving at all on the first shift.  Suddenly, I suspected the cable itself.  Releasing the gear cable from the derailleur again, I wiggled the metal cable back and forwards through the last &#8216;loop&#8217; of the black outer.  It moved, but it certainly felt a little bit sticky.  Sticky enough to cause the problem?  Perhaps there was enough resistance to counteract the tension released by the first click, but not enough to resist two clicks.<\/p>\n<p>Lacking any objective means of measuring the friction, I decided to <a href=\"http:\/\/www.wiggle.co.uk\/p\/cycle\/7\/Shimano_Deore_SIS_Gear_Cable_Set\/5360016304\/\">replace them<\/a>.  With a bit of help from <a href=\"http:\/\/www.sheldonbrown.com\/cables.html\">Sheldon<\/a> and my trusty Dremel, I soon had the new cables cut to length &#8211; using the old ones as a pattern.<\/p>\n<p>And, guess what?  I now have silky smooth just-like-new gear shifts all over again.  Woo! \ud83d\ude42<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I went to re-setup the gears on my bike (Gary Fisher Hoo Koo Ee Koo) last week and couldn&#8217;t get them working. Now, this is a bit frustrating because I&#8217;ve set up gears many times before and, although it can take a wee while to get them indexed right, the recipe is simple and pretty [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[],"_links":{"self":[{"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=\/wp\/v2\/posts\/212"}],"collection":[{"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=212"}],"version-history":[{"count":4,"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=\/wp\/v2\/posts\/212\/revisions"}],"predecessor-version":[{"id":221,"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=\/wp\/v2\/posts\/212\/revisions\/221"}],"wp:attachment":[{"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=212"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=212"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.nobugs.org\/lejog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=212"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}